SquareFootage
Aktualisiert July 2026

Square Feet to Kanal Converter

Turn a square-foot plot size into kanal — the South-Asian land unit used across Pakistan and northern India — using the standard 5,445 sq ft per kanal.

  • 100 % kostenlos — ohne Anmeldung
  • Sofortige Ergebnisse in Echtzeit
  • Daten verlassen nie deinen Browser
  • Genutzt von Eigentümern & Handwerkern
1kanal

5,445 sq ft = 1 kanal

Square feet5,445
Square meters505.857
Square yards605
Square inches784,08
Acres0.125
Hectares0.05059
Marla2
Kanal1
Gaz (sq yard)605

Was es bedeutet

One kanal equals 5,445 square feet, which is the same as 20 marla or 605 square yards. To convert square feet to kanal, divide the area in square feet by 5,445. For example, 5,445 sq ft is exactly 1 kanal, 2,722.5 sq ft is 0.5 kanal (10 marla), and 10,890 sq ft is 2 kanal.

Formel & Anleitung

So wird gerechnet

Kanal is a fixed land unit, so the conversion is a simple division. The standard kanal is built from 20 marla of 272.25 sq ft each, which gives exactly 5,445 square feet.

  1. 1Start with the plot area in square feet (length × width if you're measuring a rectangle).
  2. 2Divide the square footage by 5,445 — the number of square feet in one kanal.
  3. 3The result is the plot size in kanal (e.g. 8,167.5 ÷ 5,445 = 1.5 kanal).
  4. 4To read the remainder in marla, multiply the fractional part by 20 (0.5 kanal = 10 marla).
Rechenbeispiel

In Zahlen

2,722.5 sq ft (10 marla)0.5 kanal
5,445 sq ft (20 marla)1 kanal
10,890 sq ft2 kanal
21,780 sq ft4 kanal

At 5,445 sq ft per kanal, common plot sizes convert cleanly from square feet to kanal.

Genauigkeit & Annahmen

  • Uses the standard kanal of 5,445 square feet, based on a marla of 272.25 sq ft.
  • 1 kanal is defined as exactly 20 marla, the sub-unit most plots are quoted in.
  • One kanal is about 0.125 acre (one-eighth), so 8 kanal make roughly 1 acre.
  • Regional variance exists — some districts use a smaller marla, so confirm the local standard for legal documents.

Wichtige Tipps & Regeln

  • 1 kanal = 5,445 square feet (the standard used across most of Pakistan and Indian Punjab).
  • 1 kanal = 605 square yards (gaz), the unit many property listings display.
  • 1 kanal = 20 marla, so 10 marla is half a kanal and 5 marla is a quarter.
  • 1 kanal ≈ 505.86 square metres ≈ 0.125 acre (one-eighth of an acre).
Anwendungsfälle

Für wen dieser Rechner ist

Plot sizing in Pakistan & India

Housing societies like DHA and Bahria list plots as 5, 10, or 20 marla and 1 or 2 kanal — convert your sq ft to compare.

Real estate & valuation

Agents price residential land per kanal or per marla, so converting square footage helps you check a quoted rate.

Agriculture & farmland

Farmland is often recorded in kanal and marla in revenue records; convert measured area to match the land document.

What is a kanal and how it relates to square feet

The kanal is a traditional unit of land area used across Pakistan and the northern Indian states of Punjab, Haryana, and Himachal Pradesh. Under the standard system, one kanal is 5,445 square feet, which is identical to 20 marla, 605 square yards, or about 505.86 square metres. It is one of the most common ways property is bought, sold, and registered in the region, so being able to move between square feet and kanal is essential when reading listings or land records.

The number 5,445 is not arbitrary — it comes from the marla, the smaller unit that makes up a kanal. The standard marla is 272.25 square feet, and 20 marla multiplied by 272.25 gives exactly 5,445 square feet. Because the relationship is fixed, converting square feet to kanal is just division: take the area in square feet and divide by 5,445.

How to convert square feet to kanal step by step

Suppose you have a rectangular plot that measures 90 feet by 60.5 feet. Multiply the two sides to get the area: 90 × 60.5 = 5,445 square feet, which divides by 5,445 to give exactly 1 kanal. A larger plot of 10,890 square feet divides to 2 kanal, and a 2,722.5 square-foot plot comes out to 0.5 kanal, or 10 marla. When the answer is not a whole number, the fractional part converts to marla by multiplying by 20 — so 1.25 kanal is 1 kanal and 5 marla.

This makes kanal easy to slot alongside other land units. One kanal is roughly one-eighth of an acre, so eight kanal fill about a full acre. If you already think in acres for farmland, dividing the acre figure by eight gives you a quick kanal estimate, while the square-foot route above gives the precise number.

Watch for regional variations

While 5,445 square feet per kanal is the standard across most of Pakistan and Indian Punjab, the marla was historically tied to local measuring rods, so a few districts still use a smaller marla of around 225 square feet. In those areas a kanal works out closer to 4,500 square feet. Some regions also express land as 8 kanal to the acre, which matches the one-eighth relationship. For casual comparison the standard 5,445 figure is reliable, but for legal transfers, mutations, or revenue records, always confirm the marla value used by the local land authority before converting.

FAQ

FAQ zum Sq Ft to Kanal-Rechner

One kanal is 5,445 square feet under the standard system used across most of Pakistan and Indian Punjab. That figure equals 20 marla of 272.25 square feet each, or 605 square yards. To go the other way, divide any square-foot area by 5,445 to get the size in kanal.

One kanal is exactly 20 marla. Since a standard marla is 272.25 square feet, 20 marla give 5,445 square feet. So 10 marla is half a kanal (2,722.5 sq ft) and 5 marla is a quarter kanal (1,361.25 sq ft).

One kanal is about 0.125 acre — one-eighth — so roughly 8 kanal make a full acre. An acre is 43,560 square feet and a kanal is 5,445 square feet, and 43,560 ÷ 5,445 equals exactly 8. Many revenue systems formalise this as 8 kanal to the acre.

Divide the area in square feet by 5,445. For example, 5,445 sq ft is 1 kanal, 10,890 sq ft is 2 kanal, and 2,722.5 sq ft is 0.5 kanal. For a rectangular plot, first multiply length by width in feet, then divide the result by 5,445.

Privat und sicher konzipiert

Im Browser berechnet

Jede Messung läuft clientseitig. Nichts wird hochgeladen, gespeichert oder an einen Server gesendet.

Kein Login, niemals

Keine Konten und kein Tracking deiner Projektdaten – Tool öffnen und messen.

Standardmäßig sicher

Vollständig über HTTPS ohne Mixed Content ausgeliefert, damit deine Verbindung privat bleibt.

Mehr in unserer Datenschutzerklärung.

Bereit zum Messen?

Scrolle zum Rechner nach oben oder kehre zum Haupt-Quadratfuß-Tool zurück.