How Many Square Feet Is a 16×20 Room?

A 16×20 room is 320 square feet — here's the math, the metric conversions, and what the space is good for.

100% free — no sign-up
Instant, real-time results
Data never leaves your browser
Used by homeowners & contractors

Units

Length

Width

Total area

320sq ft

Square meters

29.73 m²

Square yards

35.56 yd²

What it means

A 16×20 room is 320 square feet. Square footage is length × width, so 16 ft × 20 ft = 320 sq ft. In metric that's about 29.73 square meters, and it's 35.56 square yards. The calculator above is pre-filled with 16 × 20 — change the numbers for any other size.

Formula & guide

How it's calculated

Square footage is an area, found by multiplying the two side lengths in feet. For a rectangular room, that's simply length times width.

1Measure the two sides in feet — here they are 16 ft and 20 ft.
2Multiply them: 16 × 20 = 320 square feet.
3To get square meters, multiply by 0.0929 → about 29.73 sq m.
4To get square yards, divide by 9 → 35.56 sq yd.

Worked example

See it in numbers

Dimensions	16 ft × 20 ft
Square feet	320 sq ft
Square meters	29.73 sq m
Square yards	35.56 sq yd

A 16×20 room = 320 sq ft ≈ 29.73 sq m ≈ 35.56 sq yd.

Accuracy & assumptions

Assumes a rectangular room measured wall to wall in feet.
Measure to the inside of the walls at floor level for usable area.
For an L-shaped or irregular space, split it into rectangles and add each area.
Order flooring with a 5–10% waste factor on top of the raw area.

Key tips & rules

16 × 20 = 320 square feet (the base figure for everything else).
Metric: about 29.73 square meters. Yards: 35.56 square yards.
Flooring: order about 352 sq ft to cover 320 sq ft with 10% waste.
Ceiling height does not change floor square footage — only the floor area does.

Use cases

Who this calculator is for

Great room or primary suite

Generous enough for multiple furniture zones in one space.

Studio or garage

A typical footprint for a studio apartment or a one-car garage.

Material estimates

The area drives flooring, paint, and even mini-split HVAC sizing.

What a 16×20 room is good for

At 320 square feet, a 16×20 space is a large room — a primary suite, a spacious living room, a studio, or a one-car garage. There's room for zones: seating plus a desk, or a bed plus a sitting area.

Because square footage is just length times width, you can check any variation in seconds with the room square footage calculator — enter your exact measurements, including inches, and it updates instantly with square feet, meters, and yards.

Flooring and paint for a 16×20 room

To floor a 16×20 room, start from the 320 square feet and add a 5–10% waste allowance for cuts and pattern matching — about 352 sq ft ordered. The flooring square footage calculator turns that into boxes for you. For painting, the floor area isn't what you need — measure the walls instead with the wall square footage calculator.

Related calculators

Pairs well with

18×18 Room 20×20 Room Room Flooring / Tile

FAQ

16×20 Room calculator FAQs

A 16×20 room is 320 square feet. You multiply the two sides: 16 ft × 20 ft = 320 sq ft. That is also about 29.73 square meters or 35.56 square yards.

A 16×20 room is about 29.73 square meters. Convert by multiplying the 320 square feet by 0.0929 (since 1 sq ft = 0.092903 sq m): 320 × 0.0929 ≈ 29.73 sq m.

A 16×20 room is a large room at 320 square feet. It typically fits a king bed with a sitting area, a full living-room set, or a single-car garage bay. Whether it feels large depends on the layout, ceiling height, and how the furniture is arranged.

You need 320 square feet of flooring for a 16×20 room, plus about 10% for cuts and waste — so order roughly 352 sq ft. Buy full boxes and keep a few spares for future repairs.

From the blog